EU Packaging Regulation PPWR Now in Force: Compliance Guide | Yinrui Logistics

Written by

in

EU Packaging Regulation (PPWR) Is Now in Force: A Compliance Guide | Yinrui Logistics

1. What Is PPWR, and Why It Matters Now

The Packaging and Packaging Waste Regulation (PPWR), Regulation (EU) 2025/40, has applied since 12 August 2026. It replaces the nearly thirty-year-old Packaging Directive 94/62/EC.

That shift from “directive” to “regulation” carries real consequences: a regulation applies directly across all 27 member states, with no national transposition and therefore no room for member-by-member variation. Directive 94/62/EC was repealed on the same date.

Why importers into the EU need to pay attention:

  • Compliance obligations do not distinguish between EU and non-EU businesses. A non-EU producer must appoint an authorised representative in the EU and carries the same obligations as an EU producer.
  • Non-compliance can result in customs refusal at the border or delisting from e-commerce platforms.
  • The scope is not limited to sales packaging — transport packaging such as cartons, pallets and stretch film is covered too.

2. Core Requirements at a Glance

Requirement Legal basis Applies from Key figure
Heavy metals limit Article 5(4) In force Lead + cadmium + mercury + hexavalent chromium ≤ 100 mg/kg
PFAS ban in food-contact packaging Article 5(5) 12 Aug 2026 (in force) Any PFAS 25 ppb / sum of PFAS 250 ppb / total 50 ppm
Packaging must be recyclable Article 6(1) In force Design for recycling from 2030-01-01; scaled recycling from 2035-01-01
Minimum recycled content in plastic packaging Article 7 2030-01-01 PET contact-sensitive 30% / other plastic packaging 35%
Packaging minimisation Article 10 In force Assessed under Annex IV method
Harmonised labelling Articles 12–13 In force Material pictogram + manufacturer/importer details + QR code
Extended producer responsibility Article 45 In force Registration in each member state
Ban on six packaging formats Annex V 2030-01-01 Single-use collation packaging, produce packaging under 1.5 kg, etc.
Member state penalties Article 68 By 12 Feb 2027 Must include administrative fines with deterrent effect

Mind the two batches. A great deal of secondary commentary presents the 2030 requirements as if they applied immediately in 2026. Recycled content, design for recycling and the Annex V format bans belong to the 2030 batch. What is already mandatory today is PFAS, heavy metals, labelling and EPR registration.

3. What the Regulation Actually Says

3.1 The PFAS thresholds (Article 5(5))

Since 12 August 2026, food-contact packaging may not be placed on the EU market if it contains per- and polyfluoroalkyl substances (PFAS) at or above any of the following:

  • (a) 25 ppb — any single PFAS, measured by targeted PFAS analysis, excluding polymeric PFAS
  • (b) 250 ppb — the sum of PFAS, on the same measurement basis, with prior degradation of precursors where applicable
  • (c) 50 ppm — total PFAS, including polymeric PFAS

In addition, where total fluorine exceeds 50 mg/kg, manufacturers, importers and downstream users in the supply chain must provide, on request, a fluorine content declaration (either PFAS or non-PFAS) for the Annex VII technical documentation.

3.2 Recyclability and recycled content (Articles 6 and 7)

Article 6 requires all packaging placed on the market to be recyclable, but the two limbs phase in separately:

  • Design for recycling → from 1 January 2030
  • Separate collection and recycling at scale → from 1 January 2035

Article 7 sets minimum recycled content for plastic packaging by packaging type, applying from 1 January 2030 and calculated as an annual average per manufacturing plant:

Packaging type 2030 2040
Contact-sensitive packaging predominantly PET (excluding single-use beverage bottles) 30% 50%
Contact-sensitive packaging of plastics other than PET (excluding single-use beverage bottles) 10% 25%
Single-use plastic beverage bottles 30% 65%
Other plastic packaging 35% 65%

Recycled material must come from post-consumer plastic waste.

3.3 Extended producer responsibility (Article 45)

PPWR defines “producer” broadly: not only manufacturers, but importers and distributors are also treated as producers in a range of circumstances. Non-EU businesses must appoint an authorised representative within the EU and register under EPR in each member state where they place products on the market.

3.4 Penalties (Article 68)

Member states must lay down penalties by 12 February 2027; penalties must be effective, proportionate and dissuasive, and those for infringements of Articles 24–29 must include administrative fines. The regulation itself sets no harmonised fine amount — the levels are left to each member state. Figures circulating online that cite a maximum fine have no basis in the text.

4. What This Means for Exporters

First, prepare packaging documentation before it becomes a shipment blocker. PFAS and heavy metals are chemical parameters — if suppliers upstream will not provide test data, the problem cannot be fixed at the loading dock.

Second, EPR registration is per member state, not one-and-done. Goods destined for Germany, France and Spain require registration in each of those markets. The assumption that a single filing covers the EU does not hold.

Third, transport packaging cannot be overlooked. Many exporters focus solely on the product’s sales packaging, but outer cartons, pallets and stretch film fall within PPWR’s definition of packaging. Assess transport and sales packaging separately for producer status.

Fourth, the 2030 window is open but not indefinite. Redesigning packaging, qualifying new suppliers and obtaining certification all take lead time. The 2030 requirements belong in product development plans now.

5. Compliance Checklist

① Define your packaging scope — Identify every packaging level (sales, grouped, transport) and check each against the packaging definition in Annex I.

② Screen for PFAS exposure — Start with food-contact packaging: food-grade paper, coatings, greaseproof liners, quick-service packaging. Obtain PFAS test reports from suppliers; where total fluorine exceeds 50 mg/kg, prepare a fluorine content declaration.

③ Verify heavy metals — Confirm that lead, cadmium, mercury and hexavalent chromium together stay at or below 100 mg/kg, and keep the test reports on file.

④ Implement labelling — Confirm the material composition pictogram, manufacturer or importer name, address and electronic contact details, and an identifier such as type, batch or serial number. The harmonised pictogram is set by an implementing act.

⑤ Complete EPR registration — Appoint an authorised representative within the EU and register as a producer in each relevant member state.

⑥ Compile technical documentation — Prepare the Annex VII conformity assessment documentation and issue the Annex VIII EU declaration of conformity.

⑦ Plan for the 2030 batch — Build recycled content targets, design for recycling, and substitutes for the Annex V banned formats into your packaging roadmap.

⑧ Maintain a complete compliance file — Material composition declarations, recyclability evidence, recycled content evidence, PFAS and heavy metals test reports, technical documentation and the declaration of conformity.

6. Frequently Asked Questions

When does PPWR apply, and must we comply today?

Regulation (EU) 2025/40 applies from 12 August 2026, so it is already in force. Requirements phase in: the PFAS ban, heavy metals limits, labelling and EPR registration already apply; minimum recycled content, design for recycling and the Annex V packaging format bans apply from 1 January 2030; recycling at scale applies from 1 January 2035.

We are a non-EU exporter. Do PPWR obligations apply to us?

Yes. PPWR defines producers to include importers and distributors, and non-EU businesses carry the same obligations as EU businesses. You must appoint an authorised representative within the EU and complete EPR registration in each member state where you place products on the market.

What are the PFAS limits for food-contact packaging?

Under Article 5(5), from 12 August 2026 packaging is banned from the market if any of three thresholds is reached: any single PFAS at 25 ppb; the sum of PFAS at 250 ppb; or total PFAS including polymeric PFAS at 50 ppm. Where total fluorine exceeds 50 mg/kg, the supply chain must provide a fluorine content declaration on request.

Do shipping cartons and pallets count as PPWR packaging?

Yes. PPWR covers sales, grouped and transport packaging, which includes outer cartons, pallets and stretch film. Exporters often overlook transport packaging while focusing on the product’s own packaging. Producer status and compliance responsibility should be assessed separately for transport and sales packaging.

What is the maximum fine under PPWR?

The regulation sets no harmonised fine amount. Article 68 requires member states to adopt penalties by 12 February 2027, effective, proportionate and dissuasive, with administrative fines for infringements of Articles 24 to 29. The levels are set nationally, so any single maximum figure quoted online has no basis in the text.

Do we need to meet the recycled content targets now?

No, but planning should start now. Article 7 applies from 1 January 2030, with targets by packaging type: 30% for PET-based contact-sensitive packaging, 10% for non-PET plastic contact-sensitive packaging, 30% for single-use plastic beverage bottles and 35% for other plastic packaging, rising to 50%, 25%, 65% and 65% in 2040. Recycled material must come from post-consumer plastic waste.

What packaging documentation should we request from suppliers?

Ask for material composition declarations, recyclability evidence, recycled content evidence, and PFAS and heavy metals test reports. Exporters should also prepare Annex VII technical documentation and an Annex VIII EU declaration of conformity to form a complete compliance file for inspection.

7. Official Sources

  • Full text (EUR-Lex): Regulation (EU) 2025/40, CELEX 32025R0040
  • Adopted 19 December 2024; published in the Official Journal on 22 January 2025
  • European Commission packaging waste policy page: environment.ec.europa.eu

💡 For a packaging compliance assessment of specific products, or help organising your EU-bound packaging documentation, contact Yinrui Logistics. Website: sz-yr.com | Tel: +86 18102902805

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *